The Vise Square by Edge Technology will give you a more reliable method to align the vise to the mill table. The conventional alignment technique requires the mill table to be cranked back and forth to check the results of a series of small adjustments made to the vise. This process is repeated over and over until you either get lucky or give up and call it good enough. The Vise Square will make all of that wasted time and frustration a thing of the past. The Vise Square eliminates the guesswork by allowing you to monitor the movement of the right side and the left side of the vise jaw simultaneously. Use your spindle mounted test style indicator to monitor the left side of the jaw while the high precision five tenths indicator mounted in the Vise Square monitors the right side of the jaw. This dual indicator configuration makes the process very straight forward and repeatable.
• 0.0005" graduation indicator.
• Rigidly mounts to the T-slots in mill table.
• High strength alloy construction.
• Detent ball set screws used for precision alignment in T-slot.
Compatibility:
Works with 6" vise widths only.
Does not work with rotating vise base plates.
Works with 5/8" T-slot widths only.