Loading... Please wait...
Untitled Document

 

  • Image 1

Chuck Stop

$149.99
SKU:
30-000
Shipping:
Calculated at checkout
Quantity:

Product Description

The Chuck Stop by Edge Technology is designed to locate shorter parts beyond the chuck jaws to provide clearance for facing operations. The Chuck Stop uses different height parallel bars to achieve the required spacing. A centering plug is used to keep the unit centered to the ID of the chuck. Strong neodymium magnets secure it to the face of the chuck.

 

Part #30-000 includes the following:

  • A case with 10 sets of parallel bars. Bar heights are 1/2" to 1-5/8" in 1/8" increments.
  • One Chuck Spider with neodymium magnets
  • 6 different size centering plugs

 

All other part numbers include the following:

  • 1 set of parallel bars
  • One Chuck Spider with neodymium magnets
  • 6 different size centering plugs

 

**Extra Chuck Spiders and Parallel Bars are available in the Replacement Parts section.**

key features

• Parallel bars are heat treated and surface ground to 0.0002" parallelism accuracy.
• Strong neodymium magnets secure the Chuck Stop to the chuck face.
• Chuck Spider made from high strength alloy.
• A centering plug fits the ID of the chuck and keeps the Chuck Stop centered.
• Included centering plug diameters are 1.4", 2.0", 2.5", 3.0", 3.5", and 4.0"
• The Chuck Stop is 6.0" in diameter.
• Designed for 3 jaw chucks only.
• For use on 6" diameter chucks and larger.
• Minimum stock diameter is 0.800"


chuck spacer on 3 jaw chuck on lathe

chuck spacer on 3 jaw chuck on lathe

chuck spacer on 3 jaw chuck on lathe

chuck spacer on 3 jaw chuck on lathe